Exterior Rearview Mirror Housing

Exterior Rearview Mirror Housing





1 Mirror housing

• Removing:

- Remove bolts => [ (Item 4) Bolts ] from cover trim => [ (Item 3) Lower cover ] and remove downward.

- Release housing from locking tabs on mirror adjusting unit and remove it upward.

• Installing:

- Position mirror housing onto mirror adjusting unit => [ (Item 2) Mirror adjusting unit ] from above.

- While doing so, locking tabs - arrows - in mirror adjusting unit must engage above and below => [ Lower mirror locking tab ].

2 Mirror adjusting unit

3 Lower cover

4 Bolts

• 1 Nm

Lower mirror locking tab





- When installing, locking tab - arrow A - of mirror adjusting unit - 2 - must be inserted into mirror housing catches - 1 - in - direction of arrow -.