Right Exhaust Manifold

Right Exhaust Manifold

Removing

- Remove the air filter housing.

- Remove the right front exhaust pipe with catalytic converter. Refer to => [ Right Exhaust Pipe with Catalytic Converter ] Right Exhaust Pipe with Catalytic Converter.

- Disconnect the electrical connector - 1 - for the heated oxygen sensor (HO2S) (G39) and free up the wire.






• Ignore - 2 -.

- Remove the bolts - 1 through 4 - and remove the heat shield.






- Remove the nuts - 7 - and - 9 - and the heat shield bracket.






- Remove nuts - 1 through 6 - and - 8 - and the exhaust manifold.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Exhaust Manifold Overview ] Exhaust Manifold Overview.

• Replace the seals and self-locking nuts.

- Tighten the exhaust manifold nuts => [ Right Exhaust Manifold, Tightening
Specifications and Sequence ] Exhaust Manifold Overview.






- Install the right front exhaust pipe with catalytic converter => [ Right Exhaust Pipe with Catalytic Converter ] Right Exhaust Pipe with Catalytic Converter.

- Install air filter housing.