Timing Mechanism Drive Chain Assembly Overview

Timing Mechanism Drive Chain Assembly Overview





1 Guide Rail

2 Bolt

• Replace

• 10 Nm plus an additional 90° turn

3 Bolt

• Tightening specifications => [ (Item 13) Bolt ] Camshaft Timing Chains Assembly Overview

4 Thrust Washer for Drive Sprocket

5 Drive Sprocket for Left Timing Chain

6 Bolt

• Replace

• 10 Nm plus an additional 90° turn further

7 Power Take-Off Drive Chain

• Before removing, mark the direction of rotation with paint

• Removing and installing, refer to => [ Timing Mechanism Drive Chain ] Timing Mechanism Drive Chain

8 Guide rail

9 Bolt

• Replace

• 10 Nm plus an additional 90° turn

10 Bolt

• Replace

• 8 Nm plus an additional 45° turn

11 Mounting Bracket For Drive Sprocket

• For the right camshaft timing chain

• Asymmetrical version

12 Thrust Washer

• Asymmetrical version

13 Drive Sprocket for Right Timing Chain

14 Pivot Pin for Drive Sprocket

• Asymmetrical version

15 Bolt

• Tightening specifications => [ (Item 5) Bolt ] Camshaft Timing Chains Assembly Overview

16 O-ring

• Replace

17 Chain Tensioner

18 Bolt

• 9 Nm

19 Crankshaft

20 Bolt

• Replace

• 10 Nm plus an additional 90° turn

Installation Location of the Mounting Pins for the Right Camshaft Timing Chain Drive Sprocket





• The alignment bushings in the right camshaft timing chain drive sprocket mounting pins - 3 - must engage in the holes in the thrust washer - 1 - and cylinder block.

2 Right camshaft timing chain drive sprocket
4 Bolt