Washer Fluid Level Switch: Service and Repair

Windshield Washer Fluid Level Sensor

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Special tools, testers and auxiliary items required

• Reservoir

Removing

- Switch off ignition and remove ignition key.

- Remove the left front wheel housing liner.

- Place a reservoir under the washer fluid reservoir.

- Disconnect the electrical connector - 1 -.





- Remove the windshield washer fluid level sensor (G33) - 2 - from the washer fluid reservoir.

Installing

Install in reverse order of removal, observing the following:

- Check the sealing grommet - 3 - for damage.

- Install the left front wheel housing liner.