1/2 Left and Right Backrest Assembly Overview
1/2 Left and Right Backrest Assembly Overview
• When installing left and right 1/2 backrest, follow threaded connection installation sequence.
- Tighten the screw and nut - 9 - hand-tight. Tighten the screws - 1 - to the tightening specification. Tighten the nut - 5 - to the tightening specification. Tighten the screw and the nut - 9 - to the tightening specification.
1 Bolt
• 40 Nm
• Quantity: 4
2 Right release
• Assembly Overview, refer to => [ Left or Right Release Assembly Overview ] Left or Right Release Assembly Overview
3 1/2 right backrest
• Removing and Installing, refer to => [ Backrest ] Backrest
4 Left 1/2 backrest
• Removing and Installing, refer to => [ Backrest ] Backrest
5 Nut
• 55 Nm
6 Left release
• Assembly Overview, refer to => [ Left or Right Release Assembly Overview ] Left or Right Release Assembly Overview
7 Center bearing cover cap
• Removing and Installing, refer to => [ Center Bearing Cover Cap ] Center Bearing Cover Cap
8 Belt latch
• Assembly Overview, refer to => [ Rear Belt Latch Assembly Overview ] Rear Belt Latch Assembly Overview
• Removing and Installing, refer to => [ Belt Latch ] Belt Latch
9 Screw and nut
• For the correct tightening specification refer to => [ (Item 3) Nut ] Rear Belt Latch Assembly Overview or => [ (Item 4) Bolt ] Rear Belt Latch Assembly Overview