Trim With Entry Assistance Handle, Coupe Only From 11.06
Trim with Entry Assistance Handle, Coupe Only from 11.06
• The trim with the handle can be removed and installed with the front seat installed.
Special tools, testers and auxiliary items required
• Pry lever (80 - 200)
• Wedges (T10383)
Removing
- Carefully loosen the trim - 1 - at the top - arrows - with a trim removal wedge (T10383).
- To prevent indents in the trim, cover the trim with reinforced tape - 2 - as illustrated.
- Remove the handle - 1 - and the trim using the pry lever (80 - 200) - arrow -.
Installation
Install in reverse order of removal. Note the following:
- Install the handle - 1 - and the trim until they click into place.
- Check function of the entry assistance handle.