Transverse Link Mounting Bracket
Transverse Link Mounting Bracket
Special tools, testers and auxiliary items required
• Punch (VW 411)
• Thrust Plate (VW 401)
• Thrust Plate (VW 402)
• Tube Trans. Drive Shaft (VW 426)
• Punch (VW 412)
• Assembly Tool (T10219)
Mounting Bracket, Pressing Off Transverse Link
• Hold transverse link firmly while pressing off.
1. (VW 401)
2. (VW 411)
3. (VW 402)
- Press mounting bracket with bonded rubber bushing off transverse link.
Mounting Bracket, Pressing onto Transverse Link
- Coat the hex on the transverse link with installation lubricant. Refer to the Parts Catalog (thinned down with water to a ratio of 1:20).
- Carefully press bearing onto transverse link as far as stop.
1. (VW 412)
2. (VW 426)
3. Mounting bracket with bonded rubber bushing
4. Transverse Link
5. Tube T10219/1 from (T10219)
6. (VW 401)