Changing Tires With Tire Pressure Monitoring System
Changing Tires with Tire Pressure Monitoring System
Nickel-plated valve insert must be replaced with every tire change.
The tire pressure sensor can be reused.
- Let air out of tire by removing nickel-plated valve insert.
- Tires, dismounting => [ Dismounting Tire ]
- When reusing used tire pressure sensors , check the connection between the sensor and the metal valve for damage.
Damaged sensors must be replaced.
- Install tires => [ Mounting Tire ].
- Install new nickel-plated valve insert.
- Fill tires.
- Balance tires.
Dismounting Tire
Roll or press tires off.
When using pressure paddles, first separate tires from side opposite of valve.
Do Not Use Pressure Paddles in Hatched Area - a -.
- Position mounting head near valve so that so that tire iron can be put on approximately 30° - b - next to tire valve.
- Then remove tire in valve area first.
Mounting Tire
Do Not use Pressure Paddles in Valve Area.
- Position tire pressure sensor approximately 180° opposite the mounting head.
- Press tire in bed approximately 90° in front of mounting head - arrow -.
- Mount tire.