Removing and Installing/Replacing Right Luggage Compartment Wheel Arch Trim

51 47 161 - Removing and installing / replacing right luggage compartment wheel arch trim





Necessary preliminary tasks:
- Remove trim on rear apron 51 46 050 Removing and Installing/Replacing Top Trim on Rear Apron
- Remove flap in luggage compartment panel Removing and Installing/Replacing Flap in Luggage Compartment Trim on Right
Version with through-loading system:
- Fold down backrest for right rear seat





Specification with pocket holder:
Pull expander rivets (1) out of pocket holder (2) and remove pocket holder (2).





Release clips (1).
Release screw (2) and remove cover (3).
Feed out luggage compartment wheel arch trim (4) in direction of arrow.





Installation in version without through-loading system only:

Installation:
To install luggage compartment wheel arch trim, proceed as follows:
- Remove rear seat Removing and Installing/Replacing Rear Seat
- Unscrew screws (1).
- Press backrest from luggage compartment in direction of vehicle interior and feed luggage compartment wheel arch trim between wheel arch and backrest
Tightening torque 52 24 01AZ 52 24 Rear Seat (Normal), Manual.





Replacement:
If necessary, release retainers (1) on back of luggage compartment wheel arch trim (2) and remove securing net (3).