Air Bag Control Module: Service and Repair

65 77 016 Removing And Installing/replacing Airbag Control Unit







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







WARNING:
Note airbag safety instructions.
Incorrect handling can activate airbag and cause injury.







Necessary preliminary tasks:
- Disconnect battery negative lead and cover
- Remove storage compartment







If necessary, remove foam cover from airbag control unit.
Disconnect plug connection (1).
Release screw (2) and nuts (3).
Tightening torque 65 77 1AZ.

Installation:
Before screwing down airbag control unit (4), make sure negative lead (5) is resting on associated threaded pin.

Remove airbag control unit (4) in direction of arrow.







Replacement:
Carry out programming/coding.