Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 2011 >> M3 Convertible (E93) V8-4.0L (S65) >> Repair and Diagnosis >> Body and Frame >> Splash Guard >> Service and Repair >> Removing and Installing/Replacing Front Underbody Protection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removing and Installing/Replacing Front Underbody Protection




51 47 490 - Removing and installing / replacing front underbody protection





Warning!
Scalding hazard!
Only perform work after engine has cooled down.





Release screws (1 and 2).





Release screws (1 and 2) on both sides.
Remove tip of engine compartment shield (3) on left/right.

Installation Note:
Make sure tip of engine compartment shield (3) is installed in correct position.





Warning!
Danger of burning on oil line!

Turn catch (1) on cable through 90° and disengage in direction of arrow from bracket (2) on both sides.
Pull underbody protection (3) forwards under bumper trim and remove.

Installation Note:
Centre underbody protection (3).





Replacement:
- Modify sheet nuts

Installation Note:
If necessary, replace faulty metal nuts.
pro multis · About Operation CHARM