Symptoms - Hydraulic Brakes

Symptoms - Hydraulic Brakes

Important: The following steps must be completed before using the symptom tables.

1. Perform the Brake System Vehicle Road Test before using the hydraulic brake symptom tables in order to duplicate the customer's concern. Component Tests and General Diagnostics
2. Review the system operation in order to familiarize yourself with the system functions. Refer to the following:
* Brake Warning System Description and Operation
* Hydraulic Brake System Description and Operation
* Brake Assist System Description and Operation
* Disc Brake System Description and Operation in Disc Brakes

Visual/Physical Inspection

* Inspect for aftermarket devices which could affect the operation of the Hydraulic Brake System.
* Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for Intermittent Conditions and Poor Connections in Diagnostic Aids. Component Tests and General Diagnostics

Symptom List

Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

* Brake Warning Indicator Always On
* Brake Warning Indicator Inoperative
* Brake Pulsation
* Brake System Noise
* Braking Action Uneven - Pulls to One Side
* Braking Action Uneven - Front to Rear
* Brake Pedal Excessive Travel
* Brake Pedal Excessive Effort
* Brakes Drag
* Brake System Slow Release
* Brake Fluid Loss