Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 2010 >> LaCrosse AWD V6-3.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> 130. Engine Flywheel Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

130. Engine Flywheel Installation




Engine Flywheel Installation

Special Tools
* EN 46106 - Engine Flywheel Holding Tool
* J 45059 - Angle Meter

For equivalent regional tools, refer to Special Tools (Special Tools)

1. Place the engine flywheel in position on the crankshaft.
2. Install 2 NEW bolts in location at the top and bottom of the engine flywheel bolt pattern allowing the engine flywheel to hang in position.




3. Install the EN 46106 - tool.





Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the remaining NEW engine flywheel bolts.

* Tighten the NEW engine flywheel bolts to 30 Nm (22 lb ft).
* Tighten the NEW engine flywheel bolts an additional 45 degrees using the J 45059 - meter.




5. Remove the EN 46106 - tool.

pro multis · About Operation CHARM