Operation CHARM: Car repair manuals for everyone.

Driver or Passenger Seat Back Cushion Frame Replacement




Driver or Passenger Seat Back Cushion Frame Replacement

Removal Procedure

Warning:
Refer to Battery Disconnect Warning Battery Disconnect Warning.


1. Disconnect the battery ground cable from the battery. Refer to Battery Negative Cable Disconnection and Connection (Primary) Battery Negative Cable Disconnection and Connection (Primary)Battery Negative Cable Disconnection and Connection (Auxiliary) Battery Negative Cable Disconnection and Connection (Auxiliary).

Warning:
Refer to SIR Warning SIR Warning.


2. Disable the SIR system. Refer to SIR Disabling and Enabling Service and Repair.

3. Remove the front seat. Refer to Front Seat Replacement - Bucket Front Seat Replacement - Bucket.

4. Remove the outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement Seat Cushion Outer Trim Panel Replacement.

5. Remove the front seat-back. Refer to Front Seat Back Replacement Front Seat Back Replacement.

6. Remove the front seat-back cover. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement Driver or Passenger Seat Back Cushion Cover and Pad Replacement.

7. Discard the seat-back frame.

Installation Procedure

1. Install the front seat-back cover. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement Driver or Passenger Seat Back Cushion Cover and Pad Replacement.

2. Install the seat-back. Refer to Front Seat Back Replacement Front Seat Back Replacement.

3. Install the outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement Seat Cushion Outer Trim Panel Replacement.

4. Install the front seat. Refer to Front Seat Replacement - Bucket Front Seat Replacement - Bucket.

Warning:
Refer to SIR Warning SIR Warning.


5. Enable the SIR system. Refer to SIR Disabling and Enabling Service and Repair.

6. Connect the battery ground cable to the battery. Refer to Battery Negative Cable Disconnection and Connection (Primary) Battery Negative Cable Disconnection and Connection (Primary)Battery Negative Cable Disconnection and Connection (Auxiliary) Battery Negative Cable Disconnection and Connection (Auxiliary).

7. Test the seat for correct mechanical and electrical operation.