Fuel Line Replacement - Engine

Fuel Line Replacement - Engine

Removal Procedure

Caution:
Clean all of the following areas before performing any disconnections in order to avoid possible contamination in the system:

* The fuel pipe connections

* The hose connections

* The areas surrounding the connections

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Primary) Battery Negative Cable Disconnection and Connection (Primary)Battery Negative Cable Disconnection and Connection (Auxiliary) Battery Negative Cable Disconnection and Connection (Auxiliary).

2. Loosen the fuel filler cap to relieve any vapor pressure.

3. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Service and Repair.





4. Disconnect the engine compartment fuel feed pipe (1) at the fuel rail. Refer to Metal Collar Quick Connect Fitting Service Service and Repair.





5. Disconnect the engine compartment fuel feed pipe (1) from the fuel feed line. Refer to Metal Collar Quick Connect Fitting Service Service and Repair.

6. Cap the fuel pipes to prevent possible fuel system contamination.

Installation Procedure





1. Connect the engine compartment fuel feed pipe (1) to the fuel feed line. Refer to Metal Collar Quick Connect Fitting Service Service and Repair.





2. Install the engine compartment fuel feed pipe (1) at the fuel rail. Refer to Metal Collar Quick Connect Fitting Service Service and Repair.

3. Install the fuel filler cap.

4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Primary) Battery Negative Cable Disconnection and Connection (Primary)Battery Negative Cable Disconnection and Connection (Auxiliary) Battery Negative Cable Disconnection and Connection (Auxiliary).

5. Inspect for fuel leaks using the following method

1. Turn ON the ignition for 2 seconds.

2. Turn OFF the ignition for 2 seconds.

3. Turn ON the ignition.

4. Inspect the connections of the fuel feed pipe (1) for leaks.