Battery Positive Cable Replacement

Battery Positive Cable Replacement

Removal Procedure

Warning:
Refer to Battery Disconnect Warning Battery Disconnect Warning.


1. Disconnect the battery negative cable (1). Refer to Battery Negative Cable Disconnection and Connection (Primary) Battery Negative Cable Disconnection and Connection (Primary)Battery Negative Cable Disconnection and Connection (Auxiliary) Battery Negative Cable Disconnection and Connection (Auxiliary).

2. Remove the front seat. Refer to Front Seat Replacement - Bucket Front Seat Replacement - Bucket.

3. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement Rear Seat Cushion Replacement.

4. Remove the rear seat back. Refer to Rear Seat Back Cushion Replacement Rear Seat Back Cushion Replacement.

5. Remove the left front floor panel carpet. Refer to Front Floor Panel Carpet Replacement (LHD) Front Floor Panel Carpet Replacement (LHD).

6. Remove the rear quarter trim panel. Refer to Quarter Lower Rear Trim Panel Replacement Quarter Lower Rear Trim Panel Replacement.

7. Remove the rear compartment floor panel carpet replacement. Refer to Rear Compartment Floor Panel Carpet Replacement (Sedan) Rear Compartment Floor Panel Carpet Replacement (Sedan).





8. Remove the retaining nut (1) from the battery positive cable extension stud (3) inside the vehicle at the dash panel. Disconnect the battery positive rear cable (2) from the retainer tabs (4).





Note:
Note the routing of the battery positive cable for installation of the service assembly.

9. Disengage the battery positive cable (1), from the retainers in the passenger compartment area.





10. Working into the rear passenger seat area, disengage the battery positive cable (2) from the retainers (1).





11. Remove the nut (1) securing the body harness terminal (2) to the battery positive cable.





12. Disconnect the battery positive cable connector (1) from the body harness.

13. Loosen the battery positive clamp nut (2) at the battery positive post.

14. Remove the battery positive cable.

Installation Procedure





Caution:
Refer to Fastener Caution Fastener Caution.

1. Connect the battery positive cable to the battery post and tighten the clamp nut (2) to 10 Nm (89 lb in).

2. Connect the battery positive cable connector (1) to the body harness connector.





3. Connect the body harness terminal (2) to the battery positive cable and tighten the nut (1) to 15 Nm (11 lb ft).





4. Secure the battery positive cable retainers (1) to the rear passenger compartment area.





5. Secure the battery positive cable (1) to the front driver area.





6. Install the retaining nut (1) to the battery positive cable extension stud (3) and tighten to 10 Nm (89 lb in)

7. Ensure that the battery positive cable is secured to the body harness retainer tabs (4)and that the battery harness is correctly routed in its original location.

8. Install the rear floor panel carpet. Refer to Rear Compartment Floor Panel Carpet Replacement (Sedan) Rear Compartment Floor Panel Carpet Replacement (Sedan).

9. Install the rear quarter trim panel. Refer to Quarter Lower Rear Trim Panel Replacement Quarter Lower Rear Trim Panel Replacement.

10. Install the left front floor panel carpet. Refer to Front Floor Panel Carpet Replacement (LHD) Front Floor Panel Carpet Replacement (LHD).

11. Install the rear seat back. Refer to Rear Seat Back Cushion Replacement Rear Seat Back Cushion Replacement.

12. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement Rear Seat Cushion Replacement.

13. Install the front seat. Refer to Front Seat Replacement - Bucket Front Seat Replacement - Bucket.

14. Install the cargo area centre carpet. Refer to Rear Compartment Floor Panel Carpet Replacement (Sedan) Rear Compartment Floor Panel Carpet Replacement (Sedan).

15. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Primary) Battery Negative Cable Disconnection and Connection (Primary)Battery Negative Cable Disconnection and Connection (Auxiliary) Battery Negative Cable Disconnection and Connection (Auxiliary).