Injector Circuit Diagnosis

Diagnostic Chart:

Diagnostic Chart:

Diagnostic Aids

The VCM has integrated circuits that are fault protected; therefore, if a circuit has failed, the integrated circuits may not be damaged. If this the case, the IC will keep the circuit open until you have corrected the fault in the circuit. When you have corrected the fault, reinstall the VCM. Check the circuit. Replace the VCM only if the circuit is still inoperative.

Test Description

The numbers below refer to the step numbers on the diagnostic table.

2. This step determines if the ignition feed circuit to the injectors are OK.

3. This step determines if the injector control circuits are OK.

5. This step determines if there is an internal VCM short to ground for an injector control circuit.