Clutch Pedal Assembly: Service and Repair

Clutch Pedal Replacement

Removal Procedure

1. Move the instrument panel to the service position. Refer to Instrument Panel Service Positioning (Without SLT) Instrument Panel Service Positioning (With SLT) .




2. Disconnect the clutch pedal engine start switch electrical connector (1).
3. Remove the clutch master cylinder. Refer to Clutch Master Cylinder Replacement (Service and Repair) .




4. Remove the clutch pedal to clutch pedal bracket bolt .




5. Remove the clutch pedal to brake module bolts.
6. Remove the clutch pedal sub-assembly.



Installation Procedure





1. Install the clutch pedal sub-assembly.

Notice: Refer to Fastener Notice .

2. Install the clutch pedal to brake module bolts.

Tighten the bolts to 50 N.m (37 lb ft).





3. Install the clutch pedal to clutch pedal bracket bolt.

Tighten the bolt to 36 N.m (27 lb ft).

4. Remove the clutch master cylinder. Refer to Clutch Master Cylinder Replacement (Service and Repair) .




5. Connect the clutch pedal engine start switch electrical connector (1).
6. Install the instrument panel. Refer to Instrument Panel Service Positioning (Without SLT) Instrument Panel Service Positioning (With SLT) .