Coolant Recovery Container - Installation

2.0/2.4L ENGINE

Non - Turbo





1. Install coolant recovery container (1) and tighten fasteners to 4 Nm (35 in. lbs.).
2. To ensure proper vent hose routing, install vent hose clip on stud at dash panel.




3. Connect the MAP sensor connector.
4. Position and install the power steering fluid reservoir bracket fasteners.
5. Connect overflow hose (2) to coolant outlet connector.
6. Fill container to proper level.

Turbo





1. Install coolant recovery container (3) and tighten fasteners to 4 Nm (35 in. lbs).




2. Connect throttle and speed control cables to throttle body.
3. Install throttle cable shield to throttle body.
4. Connect overflow hose (1) to coolant outlet connector.
5. Fill container to proper level.