Disassembly

DISASSEMBLY





1. Remove the transmission. Manual Transmission/Transaxle - Removal.
2. Disassemble the geartrain housing. Disassembly.
3. Remove the retainer bolt (1).
4. Remove the bearing shell (2), reverse idler shaft (3) with the bearings (4), reverse gear (5) and the washer (6).
5. Drive out the countershaft bearing (8) using a drift punch.
6. Remove the retaining bolts (9), locking plates (10), and the mainshaft bearing (7).
7. Remove the shift shaft bearing (11).
8. Drive out the output flange seal (12).