Manufacturer Code Charts: 2: 2.5

CAUTION: If the following conditions are not complete, chances are that replacement of this or any other system component without specific direction will not, in most cases, resolve the concern and will consequently result in customer dissatisfaction.

- This step requires that a valid diagnostic trouble code has been obtained, all prior diagnostic steps have been completed, and the affected wiring integrity has been verified.

- Have all prior diagnostic steps been completed as described above?

YES -- Replace antilock electronic control unit. Go to step 2.6. 2.6

If antilock electronic control unit has been replaced and no resolution has been reached, replace the antilock brake control module. Go to step 2.6. 2.6

NO -- Go to diagnostic step last completed and continue.