Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
KA7 - Check Continuity of EVR Solenoid Signal Harness Circuit
- Key "OFF".
- EVR solenoid disconnected.
- Disconnect Powertrain Control Module (PCM). Inspect for damaged or pushed out pins, corrosion, loose wires, etc. Service as necessary.
- Install breakout box, leave PCM disconnected.
- Measure resistance between test pin 31 at breakout box and EVR circuit at EVR solenoid vehicle harness connector.
- Is resistance less than 5.0 ohms?
Yes -- Go to KA8. KA8 - Check EVR Solenoid Signal Harness Circuit For Short
No -- Service open circuit. Remove breakout box. Reconnect all components. Rerun quick test. Quick Test Appendix (Detailed Testing Instructions)