T6 Continuity Check, Circuit 886 (O/BK)

- Measure the resistance between Pin 30 on the Rotunda(r) Breakout Box 014-00322 or equivalent and G-switch harness connector Pin 1 (Circuit 886). Using the Breakout Box For Circuit Checks

- Is the resistance greater than 5 ohms?

YES -- Repair Circuit 886 (O/BK) between anti-lock brake control module and acceleration sensor. Go to T11. T11 Check For DTC Repeatability

NO -- Go to T7. T7 Short to Ground Check, Circuit 886 (O/BK)