K2
K2 CHECK FOR SHORT TO GROUND IN CIRCUIT 599 (PK/LG) AND RABS ISOLATION VALVE SOLENOID- Key "off."
- Disconnect the anti-lock electronic control module.
Anti-lock Electronic Control Module:
- Measure the resistance between the anti-lock electronic control module connector pin 13 circuit 599 (PK/LG) and chassis ground.
Is the resistance 3 ohms or greater?
> Yes
Replace the ABS control module. Repeat the system pre-check.
> No
Repair the short to ground in circuit 599 (PK/LG) and/or replace the RABS valve.