PC11

PC11 CHECK THE GROUND BETWEEN THE ABS POWER RELAY AND CHASSIS GROUNDS

- Inspect the chassis ground stud at the left-hand radiator support for loose or corroded eyelets.

- Clean and tighten any loose or dirty ground eyelets.

- Check for continuity between the ABS power relay Circuit 57 (BK) and left-hand radiator support chassis ground stud.

Is there continuity?

> Yes
Reinsert the ABS power relay. Replace the ABS warning bulb. Repeat tests PC8-PC11 looking for intermittent conditions. PC8

Go to the Intermittent Diagnostic Procedure. Intermittent Diagnosis Procedure

> No
Repair the open circuit between the ABS power relay and chassis ground, reinsert the ABS power relay. Go to Pinpoint Test PC3. PC3