Exhaust Manifold RH

Exhaust Manifold RH

Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. On 4x4 vehicles, remove the front wheel opening molding.
3. Remove the front fender splash shield.





4. NOTE: 4.6L engine shown; 5.4L engine similar.

Remove the three-way catalytic converter to exhaust manifold nuts.





5. Remove the eight nuts and the exhaust manifold.





6. Remove and discard the exhaust manifold gasket.
7. Clean and inspect the exhaust manifold.





8. To install, reverse the removal procedure.
^ Tighten the exhaust manifold nuts in the sequence shown.