Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2005 >> F 150 2WD Pickup V6-4.2L VIN 2 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Pinpoint Tests >> Test C: The Restraint Control Module (RCM) Does Not Respond to the Diagnostic Tool
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Test C: The Restraint Control Module (RCM) Does Not Respond to the Diagnostic Tool

PINPOINT TEST C: THE RESTRAINT CONTROL MODULE (RCM) DOES NOT RESPOND TO THE DIAGNOSTIC TOOL


Test C1-C3:






Normal Operation
The RCM communicates with the diagnostic tool through the international standards organization (ISO) 9141 communications network circuit 70 (LB/WH). Check circuit 70 (LB/WH) between the RCM C310a and the data link connector (DLC) C251. The total resistance value must not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in circuit 70 (LB/WH), damage to the DLC C251, or damage to the C310a.

Possible Causes
- circuit 70 (LB/WH) open
- in-line connector
- DLC C251
- RCM C310a
- RCM
pro multis · About Operation CHARM