Test X: LFC 29/DTC C1414 - Incorrect Vehicle Identification
PINPOINT TEST X: LFC 29/DTC C1414 - INCORRECT VEHICLE IDENTIFICATIONX1-X2:
X3-X4:
Normal Operation
The restraints control module (RCM) monitors the voltage/resistance at pins 10, 13 and 14 to determine if it is installed on the correct vehicle. If the RCM detects an incorrect voltage/resistance on any of these pins, it will store a diagnostic trouble code (DTC) C1414 in memory and flash a lamp fault code (LFC) 29 (or higher priority code if one exists) on the air bag indicator.
Possible Causes
An incorrect vehicle identification code could be caused by:
- an RCM installed on the wrong vehicle.
- an incorrectly programmed RCM.
- vehicle ID pins not connected as expected.