Test E: Flash Code 3 - Speed Control Deactivator Switch Circuit Failure

PINPOINT TEST E: FLASH CODE 3 - SPEED CONTROL DEACTIVATOR SWITCH CIRCUIT FAILURE

E1:

E1-E3:

E3 Continued:

Normal Operation
The speed control deactivator switch receives voltage through circuit 535 (LB/RD). When the brake pedal is not applied, voltage is sent to the speed control actuator, from the speed control deactivator switch, through circuit 307 (BK/YE). When the brake pedal is applied firmly, the speed control deactivator switch opens, removing the voltage signal from the speed control actuator and disabling the speed control.

Possible Causes
- Fuse
- Circuit 307 (BK/YE) open
- Circuit 545 (LB/RD) open
- Speed control deactivator switch
- Speed control actuator