Test E: The Wipers Will Not Park At the Correct Position
PINPOINT TEST E: THE WIPERS WILL NOT PARK AT THE CORRECT POSITIONE1-E3:
E3-E5:
E6:
Normal Operation
Under normal operation, voltage is provided to the wiper motor park switch through circuit 1671 (RD). When the wiper motor is not parked, voltage is sent from the park switch to the run/park relay through circuit 671 (LB). The SJB monitors the park switch status through circuit 671 (LB).
Possible Causes
- An open in circuit 671 (LB) or 1671 (RD)
- A short to ground in circuit 671 (LB)
- Wiper run/park relay
- Wiper motor
- Smart junction box (SJB)