Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Power Liftgate Rod
POWER LIFTGATE RODMaterial:
Material
Removal and Installation
1. Remove the LH quarter trim panel access cover.
2. Unclip the power liftgate rod from the motor assembly.
- Squeeze the clip as shown to release and position the rod assembly upward.
3. Remove the cover and the power liftgate rod-to-liftgate retaining nut.
- To install, apply Threadlock 262 to the threads of the fastener and tighten to 11 Nm (8 lb-ft).
4. Remove the 3 power liftgate rod mounting bracket nuts.
- To install, tighten to 11 Nm (8 lb-ft).
5. To install, reverse the removal procedure.