Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2007 >> Expedition 4WD V8-5.4L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Pinpoint Tests >> Test E: The Four Wheel Drive (4WD) Control Module Does Not Respond To The Scan Tool
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Test E: The Four Wheel Drive (4WD) Control Module Does Not Respond To The Scan Tool

PINPOINT TEST E: THE FOUR WHEEL DRIVE 4WD) CONTROL MODULE DOES NOT RESPOND TO THE SCAN TOOL


E1-E2:






E3-E4:






Normal Operation
The 4WD control module communicates with the scan tool through the high speed controller area network (HS-CAN). Circuits VDB04 (WH/BU) HS-CAN +) and VDB05 (WH) (HS-CAN -) provide the network connection to the 4WD control module. The 4WD control module shares the HS-CAN with powertrain control module (PCM), the transmission control module (TCM), the anti-lock brake system (ABS) module, the restraints control module (RCM), the air suspension module if equipped) and the instrument cluster. Voltage is supplied by circuits CBP35 (YE/GY), SBB35 BU/RD) and SBB43 (BU/RD). Ground is supplied by circuits GD123 (BK/GY) and GD133 (BK).

DTC U0102 or DTC U0114 - sets in a module which had attempted to communicate with the 4WD control module and failed.

Possible Causes
- Fuse
- Circuit CBP35 (YE/GY) open
- Circuit GD123 (BK/GY) open
- Circuit GD133 (BK) open
- Circuit SBB35 (BU/RD) open
- Circuit SBB43 (BU/RD) open
- Circuit VDB04 (WH/BU) open (HS-CAN +)
- Circuit VDB05 (WH) open (HS-CAN -)
- 4WD control module
pro multis · About Operation CHARM