Test E: The Wipers Will Not Park At The Correct Position
PINPOINT TEST E: THE WIPERS WILL NOT PARK AT THE CORRECT POSITIONE1-E2:
E2-E3:
E3-E5:
E5-E6:
Normal Operation
Under normal operation, voltage is provided to the wiper motor park switch through circuit CBP05 (YE). When the wiper motor is not parked, voltage is sent from the park switch to the run/park relay through circuit CRW09 (BN/BU). The SJB monitors the park switch status through circuit CRW09 (BN/BU).
Possible Causes
- An open in circuit CRW09 (BN/BU) or CBP05 (YE)
- A short to ground in circuit CRW09 (BN/BU)
- Wiper run/park relay
- Wiper motor
- Smart junction box (SJB)