Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2008 >> Escape 2WD V6-3.0L >> Repair and Diagnosis >> Cruise Control >> Testing and Inspection >> Pinpoint Tests >> Test G: Flash Code 2 - Stoplamp Switch Circuit Failure
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Test G: Flash Code 2 - Stoplamp Switch Circuit Failure

PINPOINT TEST G: FLASH CODE 2 - STOPLAMP SWITCH CIRCUIT FAILURE

Normal Operation
When the speed control actuator carries out the self-test, a voltage signal is sent through circuit CCB08 (VT/WH). Circuit CCB08 (VT/WH) carries the signal to the high mounted stoplamp, which then is routed to ground. If the signal fails to be grounded, flash code 2 is set by the speed control actuator.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- High mounted stoplamp
- Stoplamp switch
- Speed control actuator


G1-G2:




pro multis · About Operation CHARM