Test E: A Single Power Window Is Inoperative - RH Rear Window

PINPOINT TEST E: A SINGLE POWER WINDOW IS INOPERATIVE - RH REAR WINDOW

Normal Operation
The RH rear window control switch receives power from the LH front window control switch through circuit CPW14 (VT/WH). The RH rear window control switch provides power to the RH rear window motor through circuit CPW23 (GY) and ground through circuit CPW24 (WH/VT) to operate the RH rear window down; and power through circuit CPW24 (WH/VT) and ground through circuit CPW23 (GY) to operate the RH rear window up.

When operating the RH rear window using the LH front window control switch, power is sent to the RH rear window control switch through circuit CPW17 (BN/GN) and ground through circuit CPW18 (GY/VT) to operate the RH rear window down; and power through circuit CPW18 (GY/VT) and ground through circuit CPW17 (BN/GN) to operate the RH rear window up.

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- LH front window control switch
- RH rear window control switch
- RH rear window motor

E1-E3:

E3-E5:

E6-E7:

E8: