Programming and Relearning

MEMORY POSITION PROGRAMMING

Programming Memory Positions

NOTE:
- Memory positions can be stored at any time.
- Verify good battery condition before diagnosing the memory seat system. Poor battery condition may interfere with memory seat operation, even if vehicle starting is possible.

1. NOTE: To program the remote keyless entry (RKE) transmitter, refer to Locks. To set memory position(s) move the memory driver seat, memory exterior mirrors (if equipped), memory adjustable pedals (if equipped) and memory tilt steering column (if equipped) to the preferred position using the appropriate switch(es).

2. NOTE:
- Once the memory SET switch button is pressed, there is a 5-second time limit to input a memory position. If a memory position input is not received within the time limit, the operation is aborted and the memory SET switch LED (if equipped) is turned OFF.
- If one of the following other inputs is received during the time limit, the operation is aborted and the memory SET switch LED (if equipped) is turned OFF:
- Driver seat control switch
- Memory SET switch button
- Adjustable pedal control switch (if equipped)
- Exterior mirror control switch (if equipped)
- Power tilt steering column switch (if equipped).

Press the memory SET switch button, activating the memory SET switch LED (if equipped).

3. Within 5 seconds (before the LED goes out) (if equipped), press memory SET switch button 1 or 2.
4. Repeat steps 1 through 3 to initiate another memory position setting.

Recalling a Stored Memory Position

NOTE:
- A memory recall can be initiated only if the vehicle is in PARK or NEUTRAL gear and the ignition switch is not in START. A memory recall in progress will not be affected by moving the ignition switch to START or by moving the gearshift lever out of PARK or NEUTRAL.
- Input from the driver seat control switch, memory SET switch, adjustable pedal control switch (if equipped), exterior mirror control switch (if equipped) or power tilt steering column switch (if equipped) during a memory recall will abort the memory recall.

1. The driver can recall the desired memory driver seat, memory exterior mirror (if equipped), memory adjustable pedal (if equipped) and memory tilt steering column (if equipped) positions by depressing either memory SET switch button 1 or 2. Depressing memory SET switch button 1 will initiate a recall of the positions stored for Memory 1. Depressing memory SET switch button 2 will initiate a recall of the positions stored for Memory 2.