Operation CHARM: Car repair manuals for everyone.

Test I: LFC 16/DTC B2290 - Occupant Classification System Fault

PINPOINT TEST I: LFC 16/DTC B2290 - OCCUPANT CLASSIFICATION SYSTEM FAULT

Normal Operation
The occupant classification sensor (OCS) system is used to classify the front passenger seat occupant in the event of a deployable impact.

The restraints control module (RCM) monitors for fault conditions reported by the OCS system. If the RCM detects one of the following faults reported by the OCS system, it will store DTC B2290 in memory and flash LFC 16 (or higher priority code if one exists) on the air bag warning indicator.

The OCS system components (seat cushion foam pad, bladder with pressure sensor and occupant classification system module [OCSM]) are calibrated to each other and are serviced as an assembly. The OCS system components are not to be installed separately. If a new OCS system component or seat cushion foam pad are needed, a new OCS system service kit (seat wiring harness, seat cushion frame, seat cushion foam pad, bladder with pressure sensor and OCSM) must be installed as an assembly.







This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- OCS system component
- RCM


I1:






I1-I4:






I4-I6:






I6-I7:






I8-I10:






I11-I13:






I13-I14:






I15-I16:






I17-I18:






I18-I20:






I20-I22:






I22-I23:






I24-I25:






I25-I27:






I28: