Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Front Display Interface Module (FDIM)
Front Display Interface Module (FDIM)
Removal and Installation
1. NOTE: Module configuration is only required if a new Front Display Interface Module (FDIM) is being installed.
Upload the FDIM configuration information to the scan tool.
2. Remove the instrument panel upper finish panel by pulling straight back.
3. Remove the 4 FDIM screws.
4. Remove the FDIM.
- Disconnect the electrical connector.
5. To install, reverse the removal procedure.
- Download the configuration information to the FDIM.