Pinpoint Test C: DTC B1318

Driver Seat Module (DSM)

Pinpoint Test C: DTC B1318

Refer to Wiring Diagram Set 117, Remote Keyless Entry and Alarm for schematic and connector information. Diagrams By Number

Normal Operation

The Driver Seat Module (DSM) monitors the voltage from the battery to determine if it goes above or below specific thresholds and sets DTC B1318 in continuous memory if the DSM detects low battery voltage below 10 volts on circuit SBB45 (GY/RD).

- DTC B1318 (Battery Voltage Low) - a continuous memory DTC that sets when the DSM detects battery voltage below 10 volts on circuit SBB45 (GY/RD).

This pinpoint test is intended to diagnose the following:

- Wiring, terminals or connectors
- High circuit resistance
- DSM



PINPOINT TEST C: DTC B1318

NOTICE: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.

NOTE: Failure to disconnect the battery when instructed will result in false resistance readings. Refer to Battery.

C1-C5:

C5-C6: