Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Seat Control Switch
Seat Control Switch
Removal and Installation
NOTE: For parts identification and locations, refer to Seat - Exploded View, Front Seat - Exploded View, Front.
1. Disconnect the seat control switch electrical connector from under the front of the cushion frame.
- Note wire harness routing for correct installation.
2. Remove the 3 screws and outboard side shield.
3. Remove the 2 screws and seat control switch.
4. To install, reverse the removal procedure.