Automatic Transmission/Transaxle: Adjustments

Selector Lever Cable Adjustment

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Place the selector lever in the (D) position.

3. Disconnect the selector lever cable from the manual control lever.





4. Unlock the lock tab on the selector lever cable.





5. Place the manual control lever in the (D) position.
- Move the manual control lever all the way forward into the LOW position.

- Move the manual control lever 3 detents rearward into the (D) position.





6. Connect the selector lever cable to the manual control lever.





7. Lock the selector lever cable lock tab.





8. Carefully move the selector lever from detent to detent and compare with the PRNDL. Verify that the vehicle will start in PARK and NEUTRAL, and the backup lamps illuminate in REVERSE. If not, Steps 1 through 5 must be repeated. Readjust if necessary.