Clutch Slippage

Manual Transmission and Clutch

Component Tests

Clutch Slippage

1. Chock the wheels.

2. Apply the parking brake.

3. Depress and release the clutch pedal slowly to check if the pedal is binding.
- If the clutch pedal is not binding, proceed to the next step in this procedure.

- If the clutch pedal is binding, inspect and repair as necessary. Test the system for normal operation. Proceed to the next step in this procedure, if necessary.

4. Depress the clutch pedal.

5. Start the engine.

6. Shift the transmission to 4th gear.

7. Increase the engine rpm to 2,000 and slowly release the clutch pedal. If the engine stalls within 5 seconds, the clutch is not slipping.
- If the clutch is slipping, remove the clutch disc and pressure plate. Refer to Clutch, M/T. Inspect the clutch disc and pressure plate for wear and damage. Inspect the flywheel for glazing and damage. Check the clutch release hub and bearing for binding and inspect the guide tube. Inspect the input shaft for wear and damage. Repair all components as necessary.