Wiper Motor: Service and Repair

Wiper Motor

Removal and Installation

1. Remove the wiper mounting arm and pivot shaft assembly. For additional information, refer to Wiper Mounting Arm and Pivot Shaft Wiper Mounting Arm and Pivot Shaft.

2. Remove the wiper pivot arm bolt and the windshield wiper linkage arm.
- To install, tighten to 35 Nm (26 lb-ft).





3. Remove the 3 windshield wiper motor bolts and the windshield wiper motor.
- To install, tighten to 15 Nm (133 lb-in).

4. To install, reverse the removal procedure.