Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Blower Motor Resistor: Service and Repair

Blower Motor Resistor

Removal and Installation

1. Lower the glove compartment.

2. Disconnect the blower motor resistor electrical connector.

3. Remove the 2 blower motor resistor screws.
- To install, tighten to 3 Nm (27 lb-in).

4. Remove the blower motor resistor.

5. To install, reverse the removal procedure.