Air Cleaner Outlet Pipe

Air Cleaner Outlet Pipe

Removal

Navigator

1. Remove the 2 bolts and the engine appearance cover.

All vehicles

2. Loosen the 2 Air Cleaner (ACL) outlet pipe clamps.

3. Remove the ACL outlet pipe.

Installation

Navigator

1. NOTE: The ACL outlet pipe should be securely sealed, with the ends flush with the flanges on both the ACL and the Throttle Body (TB) to prevent unusual engine noise.

Position the ACL outlet pipe with the alignment indicator positioned as shown and tighten the 2 clamps.

- Tighten to 4 Nm (35 lb-in).





Expedition

2. NOTE: The ACL outlet pipe should be securely sealed, with the ends flush with the flanges on both the ACL and the TB to prevent unusual engine noise.

Position the ACL outlet pipe and tighten the 2 clamps.

- Tighten to 4 Nm (35 lb-in).

Navigator

3. Position the engine appearance cover and install the 2 bolts.
- Tighten to 5 Nm (44 lb-in).