C-Pillar Trim Panel

C-Pillar Trim Panel

Removal and Installation

1. Remove the rear seat assembly. For additional information, refer to Seating Rear Seat.

2. Using a non-marring flat-blade tool, remove the C-pillar screw cover.





3. Remove the C-pillar screw.

4. Remove the C-pillar pin-type retainer.





5. Reposition the C-pillar trim.

6. Remove the safety belt anchor bolt.
- To install, tighten to 40 Nm (30 lb-ft).





7. Reposition the safety belt through the trim panel.





8. Remove C-pillar trim panel.

9. NOTE: The C-pillar trim panel has locator pins that must be positioned correctly for installation.

NOTE: The C-pillar trim panel should be parallel to the rear window blackout.

To install, reverse removal procedure.