Selector Lever - Column Shift

Selector Lever - Column Shift

NOTE: Click here or refer to the on-line diagnostic/repair information to view this illustration as an interactive exploded view, requires Adobe(R) Acrobat(R) 8.0 or higher.

NOTE: Click here or refer to the on-line diagnostic/repair information to learn about using an Interactive Illustration.









Removal and Installation

1. Remove the steering column shrouds. For additional information, refer to Steering Column Steering Column Shroud.

2. Disconnect the Tow/Haul switch electrical connector.





3. Remove and discard the selector lever bolt.
- To install, tighten to 18 Nm (159 lb-in).





4. Remove the selector lever.

5. To install, reverse the removal procedure.