Seat Backrest Thermo-Electric Device

Seat Backrest Thermo-Electric Device

Removal and Installation

NOTE: For parts identification and location, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. Position the seat backrest fully forward.

2. Release the backrest cover J-clip and unzip the 2 zippers.

3. Disconnect the Thermo-Electric Device (TED) electrical connector.

4. Detach the pin-type retainer attaching the TED duct to the backrest frame.

5. Un-hook the TED from the backrest support wire and remove.
- If equipped with power lumbar, note cable routing for correct installation.

6. To install, reverse the removal procedure.