Brake Caliper Anchor Plate
Brake Caliper Anchor Plate
F-250/350 Vehicles Single Rear Wheel (SRW)
F-350/450 and 550 Dual Rear Wheels (DRW)
Removal and Installation
1. Remove the brake pads. For additional information, refer to Brake Pads Rear Disc Brake.
2. Remove and discard the 2 brake caliper anchor plate bolts and the brake caliper anchor plate.
- For F-250/350, tighten the new bolts to 275 Nm (203 lb-ft).
- For F-450/550, tighten the new bolts to 400 Nm (295 lb-ft).
3. To install, reverse the removal procedure.