Sunroof / Moonroof Switch: Service and Repair

Roof Opening Panel Control Switch

Removal and Installation

1. Remove the overhead console. For additional information, refer to Instrument Panel and Console Service and Repair.

2. Disconnect the 2 overhead console electrical connectors.

3. Remove the light assembly from the overhead console.

1. Carefully pull the 2 rear tabs outward and rotate the light assembly slightly away from the overhead console.

2. Carefully pull the 2 front tabs outward and remove the light assembly from the overhead console.





4. Disengage the 4 tabs and remove the switch from the light assembly.





5. Disengage the 2 tabs and remove the switch bezel from the switch.





6. To install, reverse the removal procedure.